Skip to content

Compilation

Prototype Timber Catch Fence

Prototype Timber Catch Fence

ABSTRACT Design engineers often require rockfall protection structures that have relatively low impact energy resistance. Proprietary catch fences are available to the designer, but these can have capacities that greatly exceed the computed demand energy, and therefore may be overly expensive to construct. At a…

The use of hydrofraise cutter technology to construct diaphragm walls in Auckland

The use of hydrofraise cutter technology to construct diaphragm walls in Auckland

  ABSTRACT Deep basements and structures such as shafts for infrastructure often require embedded retaining walls to allow safe excavation and the control of groundwater. In urban environments the effects of retaining structure deformation and settlement associated with dewatering or groundwater drawdown can be significant…

Numerical simulation of inclined piles under liquefaction-induced lateral spreading

Numerical simulation of inclined piles under liquefaction-induced lateral spreading

ABSTRACT Inclined piles have been widely applied to resist excessive lateral loading in engineering practice. Although some unsatisfactory observations were found in past earthquake events, supportive evidence was also observed in recent years. This paper aims to clarify the performance of inclined piles against liquefaction-induced…

The use of SCPT and HVSR for site period and subsoil class estimation

The use of SCPT and HVSR for site period and subsoil class estimation

ABSTRACT NZS 1170.5:2004 provides a subsoil classification system of classes A to E, which are determined by specific criteria of soil or rock characteristics. The fundamental site period, T, is a key parameter in the classification system and is particularly useful in deciding between soil…

Validation of performance of polymeric geogrid in reinforced wall application

Validation of performance of polymeric geogrid in reinforced wall application

ABSTRACT Tensar uniaxial geogrids are molecularly oriented polymeric grid structures developed for tension resistant inclusions in soil walls and slopes. When stressed the geogrid must be capable of sustaining the load without rupture over the design life of the structure. The earliest use of high-density…